Your Beaml machine was designed to run with all guarding in place, and with safety features fully functioning – at all times.
To protect the machine operator, and provide maximum safety, your Beaml machine was designed to run with protective guarding in position, and with safety features functioning – at all times. Beaml machines feature mechanical and software safety provisions designed to ensure that the machine doors remain closed whenever a program is running.
Some people may attempt to defeat or override the safety lockout provisions. This is a dangerous practice, and should be avoided at all costs. The safety provisions in your Beaml machine can only protect the operator if they are working properly.
If the safety features of your Beaml machines have been tampered with or are no longer operative, we would like to help you return the machine to its original factory configuration. In fact, we feel that safety is so important, that client will cover the cost of the initial machine safety inspection if the machines not in China.
That’s right, there will be charge to you for the initial inspection when the machine not in China ;If a Beamlservice technician is in your shop for a service call, he will perform a safety inspection at no charge. In addition, you can contact your local Beaml Factory Outlet to set up an appointment for a Beaml certified service technician to perform a no-charge review of your machine’s safety status, and explain what needs to be done to bring the machine’s safety features back to the original factory settings.
*DO NOT ATTEMPT TO OVERRIDE SAFETY FEATURES. DOING SO WILL MAKE THE MACHINE UNSAFE AND VOID THE WARRANTY. SEE THE OPERATOR’S MANUAL FOR COMPLETE SAFETY INFORMATION.
Electrical Testing Laboratory
All Beaml CNC machine tools carry the ETL Listed mark, certifying that they conform to the NFPA 79 Electrical Standard for Industrial Machinery and the Canadian equivalent, CAN/CSA C22.2 No. 73. The ETL Listed and cETL Listed marks are awarded to products that have successfully undergone testing by Intertek Testing Services, an alternative to Underwriters Laboratories.
Intertek Testing Services (ITS) is a laboratory accredited by the National Institute of Standards and Technology. Additionally, ITS is designated as a Nationally Recognized Testing Laboratory by OSHA, and is accredited by the Standards Council of Canada as a Testing Organization and Certification Organization.
Products that comply with ITS program guidelines are qualified to bear the ETL Listed and cETL Listed marks.
ITS – Intertek Testing Services
ETL – Electrical Testing Laboratory (circa 1904), now ETL SEMKO, a division of Intertek Group.
NFPA – National Fire Protection Association
NFPA 79 – Electrical Standard for Industrial Machinery
NIST – National Institute of Standards and Technology
NRTL – Nationally Recognized Testing Laboratory.
CE Certification
Beaml has completed the certification process that is required to affix the CE mark to our products. We declare, in sole responsibility, that all Beaml products, options and accessories comply with the regulations as outlined in the European Machinery Directive.
ISO Certification
Beaml has been assessed for conformance with the provisions set forth by ISO 9001:2015
Scope of Registration: Design and Manufacture of CNC Machine Tools and Accessories.
This registration is granted subject to the organization maintaining compliance to the noted standard. The validity of this certificate is dependent upon ongoing surveillance audits.